Max Carbide

The Turning Page “the Turning Revolution”

Broaching On A CNC Lathe

One operation seen on many turned parts today is broaching. Traditionally

broaching has been regarded as a secondary operation that was typically performed

on a broaching machine with special broaching tools. Depending on the industry,

much of this type of broaching is still being done in this manner. For instance, in the

automotive sector, almost all broaching is done by large expensive automatic

broaching machines with specially designed broaching tools that can produce the

broaching at very high speed and short cycles.

Of course the fact that they are doing over a million parts per year has much to do

with their method of manufacturing the parts. But today, even in the automotive

sector, the need for JIS and reduced inventory, can justify doing parts complete on a

single piece of equipment such as the multi-axis turn/mill center. With this

equipment, a new job can be easily modified and reconfigured for revision and

design changes. This is where flexibility wins out over speed.

Types Of Broaching.

There are a few different types of broaching that can be performed on the

CNC lathe.

#1. Single slot broaching on the inside or outside diameter of a part.

#2. Multiple shapes such as hexagons or squares.

#3. Timed broaching or broached slots that require an angular position to

another feature on the part.

#4. Free position broaching that does not require an angular position to

another feature n the part.

#5. Rotary Broaching

#6. Reciprocating Broaching

The type of broaching you need to do, will determine your tooling choice and

method.

ROTARY BROACHING

One of the easiest and fastest ways to produce a broached feature is Rotary

or Wobble broaching. Rotary broaching has been around for years in the screw

machine industry and is very effective, inexpensive and fast. It is used widely in the

manufacturing of plumbing parts such as valves and fittings and in the aerospace

and medical industries. When your parts require a single broached polygon that is

not related to another angular orientation or feature on the part such as a milled

flat or drilled hole, this is often a first choice.

A leading US company in the manufacture of Rotary broaching tools and

accessories is Slater Tool Company from Clinton Township, Michigan. They can be

found on the web at www.slatertools.com where they list a full complement of rotary

tool holders, tool bits, and detailed application documentation.

A simple example of this type of rotary broaching is the producing of an I.D.

hex on the end of a part. Let’s say it is a 5/8 hex in 12L14 steel. First thing is to

determine the max hole to drill, and then the size chamfer needed to make a good

acceptable hex. This can be determined by multiplying the hex size by 1.035 to

determine the largest pilot hole to be drilled.

Hex size .625 x 1.035 = .646 Pilot Drill = .625 to .646 diameter.

To determine an acceptable chamfering size, multiply the hex size by 1.1547

Hex size .625 x 1.1547 = .721

Next is necessary to determine the feed for the type of material and broaching tool.

For the 12L14 steel, according to Slater Tool’s web site, we should broach this at

1200 RPM with a feed of .006 i.p.r.

Here is a simple program example using the rotary broach tool programmed for a

Eurotech 735SLY.

O2007(ROTARY BROACH EX)

G0G40G80

N1G54T0101M64(.633 DRILL)

G0G99G97S3620X0Z.1M3M8

M58(LOAD MONITOR ON)

G1Z-.75F.016

M59(LOAD MONITOR OFF)

G0Z1.

M1

N2G54T0202M64(3.4 90 DEG. SPOT)

G0G99G97S635X0Z.1M3M8

G1Z-.3F.03

Z-.3605F.003

G4P100(DWELL)

G0Z3.

M1

N3G54T0303M64(5/8 ROTARY BROACH)

G0G99G97S1200X0Z.1M3M8

G1Z-.65F.006

G0Z.1

G28U0M5

M30

TOTAL PER TOOL

DRILL = 4.5 SEC. CHAMFER = 5 SEC. BROACH = 8.5 SEC.

TOTAL CYCLE TIME = 18 SEC.

NOTES AND TIPS FOR ROTARY BROACHING:

Special attention should be made to how well the tool is aligned in accordance with

the Rotary broach supplier. Miss-aligned tools will result in poor tool life and

surface finish.

This application is not suited for parts where other features such as milled flats,

slots or drilled hole patterns are related to the fixed position of the polygon

produced by the Rotary broach.

Coolants or oils are required to clear chips and reduce friction for better tool life

and surface finish.

SINGLE SLOT BROACHING

When single or multiple broach slots are required they can be done on the

CNC lathe using a single broaching tool either carbide or HSS. This type of

broaching requires the CNC to have C axis for spindle positioning and a spindle

brake to hold the spindle steady and firm while broaching. Multiple passes are

required and can be programmed easiest by using sub programming and/or macro

programming. Next we will examine both styles of programming to help determine

what best suits the programmer and the part.

Note that most broached slots should have a groove broach relief or go all the

way through the part. It is not recommended to use this broaching technique into a

blind hole or one without a groove relief. Another important item is to retract the

broaching tool completely from the broached slot before feeding or rapid traversing

back to the Z start position.

EXAMPLE: .250 broached slot through .500 deep from face.

Programmed for a Eurotech 735SLY.

Sub Program.

O1444(SUB FOR .25 WIDE BROACHED SLOT)

G0X[#103](#103= .002 RADIAL DEPTH OF A PASS)

G4P100(SMALL DWELL)

G1G98Z-.5F200.(FEED BACK .5 AT 200 INCH/MIN.)

G0X.6(CLEAR THE HOLE DIAMETER)

Z.2(RETURN TO STARTING Z)

#103=[#103+#102](UPDATE #103 TO EQUAL NEXT X VALUE FOR A PASS)

M99(REWIND)

Main Program

O1234(MAIN)

XXXX

XXXX

XXXX

(SET COMMON VARIABLES FOR BROACHING)

#101=.624(BORE DIA. LESS .001 TO MAKE EVEN # OF PASSES)

#102=.004(X DEPTH OF A SINGLE PASS)

#103=#101+#102(BORE .624 + .004 = X VALUE FOR A PASS)

N5G54T0505M64M5(.250 wide broach)

M10(C AXIS ON)

G0X.624Z.2C0.M8

M70(SPINDLE BRAKE ON)

M98P331444(CALLS SUB PROGRAM 1444 TO REPEAT 33 TIMES)

M71(BRAKE OFF)

M11(C AXIS OFF)

G0X4.Z2.

M1

XXXXXXX

XXXXXXX

XXXXXXX

M30

NOTES AND TIPS FOR SINGLE BROACHING:

The 1st. pass is X.628 (.624+.004)

The 2nd pass is X.632 (.628+.004)

Etc.

Etc.

The 33rd pass is X.756 (.752+.004)

X.624 Start from X.756 End = .132

.132/.004=33 passes

Often a G4 (Dwell) or a greater Z start value is used before the beginning of each

pass to minimize any taper caused by Servo Lag.

Macro Variables #100 - #199 are not held in Macro Offsets when the machine is

powered off. If you want the macro values retained in the offsets when the machine

is powered off, use #500-#999

Estimated Time to complete this single broach = 12 sec.

If you need to make more of the same broach at different angular positions, your

main program would look like this……

O1234(MAIN)

XXXX

XXXX

XXXX

(SET COMMON VARIABLES FOR BROACHING)

#101=.624(BORE DIA. LESS .001 TO MAKE EVEN # OF PASSES)

#102=.004(X DEPTH OF A SINGLE PASS)

#103=#101+#102(BORE .624 + .004 = X VALUE FOR A PASS)

N5G54T0505M64M5(.250 wide broach)

M10(C AXIS ON)

G0X.624Z.2C0.M8(INDEX TO 0 DEGREES)

M70(SPINDLE BRAKE ON)

M98P331444(CALLS SUB PROGRAM 1444 TO REPEAT 33 TIMES)

M71(BRAKE OFF)

G0C90.(INDEX T0 90 DEGREES)

M70(BRAKE ON)

M98P331444(CALLS SUB PROGRAM 1444 TO REPEAT 33 TIMES)

M71(BRAKE OFF)

G0C180.(INDEX TO 180 DEGREES)

M70(SPINDLE BRAKE ON)

M98P331444(CALLS SUB PROGRAM 1444 TO REPEAT 33 TIMES)

M71(BRAKE OFF)

G0C270.(INDEX T0 270 DEGREES)

M70(BRAKE ON)

M98P331444(CALLS SUB PROGRAM 1444 TO REPEAT 33 TIMES)

M71(BRAKE OFF)

M11(C AXIS OFF)

G0X4.Z2.

M1

XXXX

XXXX

XXXX

M30

BROACHING MACRO

Another alternative is to create a Macro program for your broaching requirements.

The advantage to creating a complete Macro program is you can use the one basic format

for most of your broaching needs. Below is one example of a broach Macro program used

for the same broached part from our previous sample.

Macro Variables –

#100 = Diameter of Bore to be Broached

#101 = End of Broach Slot Diameter

#102 = Broach Feed Rate

#103 = Starting Z

#104 = Ending Z

#105 = Amount of Dwell Before Cut

#106 = Depth of Cut Per Pass

#107 = Diameter to Clear Broach Slot

PROGRAM – 735SLY

N8 G54 T0808 M64 M5 (.250 WIDE BROACH)

#100=.624

#101=.756

#102= .200

#103= .200

#104= -.500

#105= .1

#106=.004

#107=.600

M10 (C AXIS ON)

G0 X#107 Z.5 C0 M8

M70 (BRAKE ON)

G0 Z=#103 (MOVE TO Z START)

WHILE[#101GT#100]DO1

G1G98X[#100+#106]F#102 (X VALUE FOR A PASS)

G4U#105 (DWELL)

9

Z#104 (ENDING Z)

G0 X#107 (CLEAR BROACH SLOT)

Z#103 (RETURN TO Z START)

#100=[#100+#106]

END1

#100=.624 (RESET VALUE)

G0Z.5 M71 (BRAKE OFF)

M11(C AXIS OFF)

X4. Z2.

M1(OPTIONAL STOP)

NOTES AND TIPS FOR BROACHING MACRO:

The WHILE and DO statements for this Macro program are recommended over the

use of a IF and GOTO statement. An IF statement requires a GOTO that searches

for the specific BLOCK number directed by the GOTO. Because of this block

search, the processing time is greater and would add to your broaching cycle time.

Example:

Instead of the WHILE and DO, we could have used the IF and GOTO.

IF[#101GT#100]GOTO555

This statement would send the machine to BLOCK N555 and repeat again until

#101 is equal to or less than #100.

The Macro program would need to be re-written with the IF statement located at

the completion of 1 broach pass.

RECIPRICATING BROACHING

High speed reciprocating broaching is becoming more and more popular and

is the first choice for anyone doing a large amount of production broaching on their

CNC equipment. Today’s high speed broaching units are mounted onto the turret

and use the live tool drive system to send the tool forward and back at faster stroke

speeds than can be achieved by the machine’s rapid traversing.

The primary benefits to this type of broaching are ….

?? Speed (reduced cycle times)

?? Increased Tool Life

?? Less machine wear or Slide Working

At stroke speeds of up to 700 strokes per minute, these units can produce

broached slots in a third of the normal single stroke fixed broach with better tool

life. Since the live tool drive system is driving the tool to reciprocate, the machine

slide stays fixed, providing added rigidity and less wear and tear on the machine as

a whole.

About the Author

Larry Greenawalt from EurotechElite was an
experienced engineer who was in charged of the Eurotech's engineering department.

Dremel MM500 Multi-Max 1/8-in Carbide Grout Blade $29.99 Multi-Max Carbide Grout Blade 1/8-in - MM500

Dremel MM920 Multi-Max 24 Grit Carbide Rasp $25.99 Multi-Max 24 Grit Carbide Rasp - MM920

Dremel MM723 Multi-Flex Carbide Blade for Multi-Max $13.99 Multi-Flex Carbide Blade - MM723

Dremel MM501 Multi-Max 1/16-in Carbide Grout Blade $23.99 Multi-Max Carb. Grout Blade 1/16-in - MM501

Bosch HC5073 Wild-Bore 1-1/4-in x 31-in x 36-in OAL SDS-Max Carbide-Tipped 4-Cutter Drill Bit $100 Wild-Bore 1-1/4" x 31" x 36" OAL SDS-Max Carbide-Tipped 4-Cutter Drill Bit - HC5073

Max $10 Max

Dremel 1/8" Tungsten Carbide Cutter. Each $7.71 Manufacturer: Dremel. Each. Abrasive Applicable Materials = Stainless Steel, Hard Steel, Cast Iron, Ceramics, Non-Ferrous Soft Metal, Plastic Control Cutter Diameter = 1/8 in Cutting Edge Material = Carbide Shank Diameter = 1/8 in Speed = 35000 rpm [Max]

Dremel 1149901 18 Inch Tungsten Carbide Cutter $24.04 Applicable Materials: Stainless Steel Hard Steel Cast Iron Ceramics NonFerrous Soft Metal Plastic. Cutting Edge Material: Carbide. Speed: 35000 rpm [Max]. Type: Dremel Bit. Shank Diam: 1/8 in. Cutter Diam: 1/8 in.

Dremel 1149903 18 Inch Tungsten Carbide Cutter $24.04 Applicable Materials: Stainless Steel Hard Steel Cast Iron Ceramics NonFerrous Soft Metal Plastic. Cutting Edge Material: Carbide. Speed: 35000 rpm [Max]. Type: Dremel Bit. Cutter Diam: 1/8 in. Shank Diam: 1/8 in.

Makita SH01W 12V Max Cordless Lithium-Ion 3-3/8-in Circular Saw $119 12V Max Cordless Lithium-Ion 3-3/8-in Circular Saw - SH01W. (2) 12V Max Lithium-Ion Batteries - BL1014. Battery Charger - DC10WB. 3-3/8-in Carbide Tipped Blade - A-95021

Milwaukee Accessory Milwaukee Accessory 3 4x21 Sds Max Bit 48-20-3932 $44.2 3/4x21 sds max bit SDS MAX carbide bits feature the SDS MAX drive system for fast bit changes and efficient power transfer from the hammer to the bit Bits under 9/16? feature the highest quality carbide and provide 2 cutting edges The flutes provide a fast, deep means of clearing concrete dust from deep holes speeding up drill rates Use only in SDS MAX drive hammers 3/4? x 21? Brand #: Milwaukee Accessory 48-20-3932 UPC: 045242102112 Keywords: rotary hammer drill bit sds max

Milwaukee Accessory Milwaukee Accessory 7 8x21 Sds Max Bit 48-20-3946 $52.46 7/8x21 sds max bit SDS MAX carbide bits feature the SDS MAX drive system for fast bit changes and efficient power transfer from the hammer to the bit Bits under 9/16? feature the highest quality carbide and provide 2 cutting edges The flutes provide a fast, deep means of clearing concrete dust from deep holes speeding up drill rates Use only in SDS MAX drive hammers 7/8? x 21? Brand #: Milwaukee Accessory 48-20-3946 UPC: 045242102181 Keywords: rotary hammer drill bit sds max

Milwaukee Accessory Milwaukee Accessory 1x13 Sds Max Bit 48-20-3952 $45.33 1x13 sds max bit SDS MAX carbide bits feature the SDS MAX drive system for fast bit changes and efficient power transfer from the hammer to the bit Bits under 9/16? feature the highest quality carbide and provide 2 cutting edges The flutes provide a fast, deep means of clearing concrete dust from deep holes speeding up drill rates Use only in SDS MAX drive hammers 1? x 13? Brand #: Milwaukee Accessory 48-20-3952 UPC: 045242102198 Keywords: rotary hammer drill bit sds max

Milwaukee Accessory Milwaukee Accessory 1x21 Sds Max Bit 48-20-3954 $49.25 1x21 sds max bit SDS MAX carbide bits feature the SDS MAX drive system for fast bit changes and efficient power transfer from the hammer to the bit Bits under 9/16? feature the highest quality carbide and provide 2 cutting edges The flutes provide a fast, deep means of clearing concrete dust from deep holes speeding up drill rates Use only in SDS MAX drive hammers 1? x 21? Brand #: Milwaukee Accessory 48-20-3954 UPC: 045242102211 Keywords: rotary hammer drill bit sds max

Milwaukee Accessory Milwaukee Accessory 1-1 8x21 Sds Max Bit 48-20-3966 $68.22 1-1/8x21 sds max bit SDS MAX carbide bits feature the SDS MAX drive system for fast bit changes and efficient power transfer from the hammer to the bit Bits under 9/16? feature the highest quality carbide and provide 2 cutting edges The flutes provide a fast, deep means of clearing concrete dust from deep holes speeding up drill rates Use only in SDS MAX drive hammers 1-1/8? x 21? Brand #: Milwaukee Accessory 48-20-3966 UPC: 045242102259 Keywords: rotary hammer drill bit sds max

Milwaukee Accessory Milwaukee Accessory 1-1 4x23 Sds Max Bit 48-20-3972 $72.31 1-1/4x23 sds max bit SDS MAX carbide bits feature the SDS MAX drive system for fast bit changes and efficient power transfer from the hammer to the bit Bits under 9/16? feature the highest quality carbide and provide 2 cutting edges The flutes provide a fast, deep means of clearing concrete dust from deep holes speeding up drill rates Use only in SDS MAX drive hammers 1-1/4? x 23? Brand #: Milwaukee Accessory 48-20-3972 UPC: 045242102280 Keywords: rotary hammer drill bit sds max

Milwaukee Accessory Milwaukee Accessory 1-1 2x23 Sds Max Bit 48-20-3988 $105.2 1-1/2x23 sds max bit SDS MAX carbide bits feature the SDS MAX drive system for fast bit changes and efficient power transfer from the hammer to the bit Bits under 9/16? feature the highest quality carbide and provide 2 cutting edges The flutes provide a fast, deep means of clearing concrete dust from deep holes speeding up drill rates Use only in SDS MAX drive hammers 1-1/2? x 23? Brand #: Milwaukee Accessory 48-20-3988 UPC: 045242102327 Keywords: rotary hammer drill bit sds max

Milwaukee Accessory Milwaukee Accessory 1 2x13 Sds Max Bit 48-20-3902 $30.21 1/2x13 sds max bit SDS MAX carbide bits feature the SDS MAX drive system for fast bit changes and efficient power transfer from the hammer to the bit Bits under 9/16? feature the highest quality carbide and provide 2 cutting edges The flutes provide a fast, deep means of clearing concrete dust from deep holes speeding up drill rates Use only in SDS MAX drive hammers 1/2? x 13? Brand #: Milwaukee Accessory 48-20-3902 UPC: 045242101979 Keywords: rotary hammer drill bit sds max

Milwaukee Accessory Milwaukee Accessory 1 2x21 Sds Max Bit 48-20-3904 $40.94 1/2x21 sds max bit SDS MAX carbide bits feature the SDS MAX drive system for fast bit changes and efficient power transfer from the hammer to the bit Bits under 9/16? feature the highest quality carbide and provide 2 cutting edges The flutes provide a fast, deep means of clearing concrete dust from deep holes speeding up drill rates Use only in SDS MAX drive hammers 1/2? x 21? Brand #: Milwaukee Accessory 48-20-3904 UPC: 045242101986 Keywords: rotary hammer drill bit sds max

Milwaukee Accessory Milwaukee Accessory 5 8x13 Sds Max Bit 48-20-3916 $34.53 5/8x13 sds max bit SDS MAX carbide bits feature the SDS MAX drive system for fast bit changes and efficient power transfer from the hammer to the bit Bits under 9/16? feature the highest quality carbide and provide 2 cutting edges The flutes provide a fast, deep means of clearing concrete dust from deep holes speeding up drill rates Use only in SDS MAX drive hammers 5/8? x 13? Brand #: Milwaukee Accessory 48-20-3916 UPC: 045242102037 Keywords: rotary hammer drill bit sds max

This entry was posted on Tuesday, May 30th, 2006 at 8:28 am and is filed under Uncategorized. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.